7.Pressthe set switch andthe alarm LED flashes. The left display shows “AL 1”) the right display showsthe alarm time and can be adjustedwith the right Up and Down Switches.
8.Repeatstep 8 for alarms2,3, and4.
9.Pressand hold the SetSwitch to exit program mode, or continue to secondlevel mode.
The SecondLevel Program Mode allows the operator to pro- gram load compensation,load anticipation, proportional control, filter cycle for the selectedproduct, and the idle parameters.
1.While in the first level mode, push and hold the Setand Exit Melt Switches for five seconds.The beeperwill sound the left display will show “Slct” (Select) andthe right display will show “Prod” (Product). The Product LED also flashes.
2.Presseither the right or left Up and Down Switchesto selecta product to program.
3.PressSet Switch andthe Other LED flashes. The left display shows “LdCo,” and the right display showsload compen- sation setting, and can be adjustedwith the right Up and Down Switches.
4.Pressthe Set Switch andthe Other LED continuesto flash. The left display shows “PC,” the right display showsthe proportional control setting, and can be adjustedwith the right Up and Down Switches.
5.Pressthe Set Switch andthe Other LED continuesto flash. The left display shows.“LdAn,” andthe right display shows load anticipation setting, and can be adjustedwith the right Up and Down Switches.
6.Pressthe Set Switch andthe Other LED continuesto flash. The left display shows “Filtr,” and the right display shows filter cycles setting, and can be adjustedwith the right Up and Down Switches.
~7. Pressthe Set Switch andthe Product LED flashes. Press either right or left Up and Down Switchesto selectanother product to program. Pressand hold the Set Switch to exit the program mode, or continue on to the third level program mode.
