FOR BETTER RECEPTION
FM
Fully unwind the wire aerial. Then extend the wire aerial and place it in the position that receives best reception.
NOTE: Do not connect to an outside aerial.
AM
Connect the loop aerial (provided) to the 'AM LOOP aerial' snap terminals at the back of the unit.
TUNING INTO A STATION MANUALLY
The system can store a total of 60 stations. (30 FM and 30 AM ). Presetting allows you to tune in to a station directly.
1.Press the FUNCTION button to select TUNER, function “TUNER” will appear in the display.
FUNCTION
2.Press the 
STOP/BAND button to select the desired band.
STO P/BAN D
3.Tune into a station using the tuning buttons. “STEREO” will appear when an FM broadcast
is in stereo.
REPE AT
TUNI NG
RAN DOM
If the FM stereo broadcast signal weak and there is hiss when you listen
Press the PLAY/PAUSE button, so that the “STEREO” disappear on the display. Press the PLAY/PAUSE button again, so that the "MONO" disappear on the display.
To search for a station quickly
Hold the 
TUNING 
buttons and tuning will automatically stop when a station is found. However, if the signal is weak the automatic search may not find any stations. In this case, search for the station manually.
After use:
Press the STANDBY/ON button to turn the power off.
Note
The last station tuned in will be recalled, even after changing the tuning band or the function, or after turning the power off.
- 10 -
