HiFi Works 811-TK5M91-031 instruction manual Tape Care Tips, Dubbing ---- from Deck B to Deck a

TAPE CARE TIPS

Preventing accidental erasure

1.Cassette tapes have two erase-protection tabs - one for each side. To protect a record- ing from being accidentally recorded over or erased, use a screwdriver to remove one or both of the cassette tape's erase-protection tabs.

Side A Tab

Side B Tab

2.If you want to record on a tape side after you have removed the erase protection

tab, place a piece of strong plastic tape over that side's erase-protection hole.

Notes:

1)Be sure you cover only the hole originally covered by the erase-protection tab.

2)Removing the erase-protection tabs does not prevent a bulk eraser from erasing a cassette tape.

DUBBING ---- FROM DECK B TO DECK A

Use only normal (type I) tapes for recording and playback.

1. Press the FUNCTION button	2. Insert the recorded tape into Deck	3. Press the PAUSE button.
to TAPE.	B and the blank tape into Deck A.
		DECK A
FUNCTION

	DECK A	DECK B
4. Press the RECORD button	5. Press the HIGH SPEED DUBBING		6. Press the PLAY button.
whichalsoengagesthePLAY	button to select the desired dubbing		DECK B
button.	speed:
	NORMAL or	HIGH SPEED DUBBING
	HIGH (display
	TAPE 2X).

DECK A

To stop dubbing

Press the STOP/EJECT buttons of Deck A and Deck B.

Note : Do not change the dubbing speed when dubbing is in progress.

RECORDING ---- DECK A ONLY

Use only normal (type I) tapes for recording.

RECORDING FROM THE BUILT-IN TUNER

1.Press the FUNCTION but- ton to select TUNER and tune into the required sta- tion. (see page 10)

2.Insert a tape into the cassette compartment.

3.Press the RECORD button which also engages the PLAY button.

FUNCTION

DECK A

DECK A

Note: If a whistling noise is heard whilst recording from an AM station, move the AM loop antenna to a position where noise is no longer heard from the unit.

If a whistle is heard (beat) it may be reduced by selecting Beat cut. The Beat cut function can be activated by pressing the HIGH SPEED DUBBING button in AM tuner mode.

- 16 -