4.Set your Bluetooth phone to ‘discover’ the Hisense HB650.
Follow your phone’s instruction guide. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘dis- cover’ or ‘add’ a Bluetooth device. * (See example from a typical mobile phone).
5.Your phone will find the Hisense HB650.
6.Your phone will then ask if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete.
In case of unsuccessful pairing, repeat steps 1 to 6.
Note: If the pairing cannot be completed within 2 minutes after the pairing mode is activated, the speakerphone will power off automatically. Please repeat steps above to pair the speakerphone and mobile phone again.
How to…
Answer a call
Press the MFB on your speaker to answer a call.
End a call
Press the MFB to end an active call.
Make a call
When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your speaker. If your phone does not allow this feature, tap on the Hisense HB650 MFB to transfer the call to the speaker.
Reject a call*
Press the MFB for approximately 2 seconds when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.
Activate voice dialing*
Press the MFB once. Wait for the beep and then announce the name you wish to call.
For best results, record the
Redial last number*
Press the MFB twice when the speaker is turned on, and not use (Standby mode).
Adjust sound and volume
During a call, repeatedly press the Volume (+) or Volume
10 | 11 |
