Hisense Group KF 346GWE instruction manual Care and Cleaning

Anti-Mold Filter

How to remove the anti-mold filter

Anti-Mold Filter

Cleaning

How to replace the anti-mold filter

Air Clean Filter (not provided)

!WARNING

How to install the air clean filter

Care and Cleaning (continued)

The anti-mode filter behind the air intake grille should be checked and cleaned at least once every three weeks.

1.Grasp both ends of the air intake grille and pull it out and up.

2.Push the anti-mold filter up slightly, and then pull it down.

Air intake grille

Anti-mold filter

Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it. 1.With the “前面”(meaning FRONT) mark facing you, slide the anti-mold

filter up into the unit and then lower the handle into the groove on the unit. 2.After installing the anit-mold filter, press the locations marked by the arrows

( ) and close the air intake grille.

Air intake grille

Anti-mold filter

The air cleaning filter removes dust and dirt from the air, and reduces odors and somke from tobacco.

This air clean filter cannot remove harmful gases or vapors nor ventilate air in the room. You must open doors or windows frequently when you use gas or oil heating appliances.Otherwise there is a risk of suffocation in extreme cases.

The air clean filter needs to be installed behind the anti-mold filter.

1.Remove the anti-mold filter.

2.Install the air clean filter in the position shown in the diagram, with the“前面” （meaning FRONT）symbol facing the front.

3.Reinstall the anti-mold fillter.

Air clean filter

17