Troubleshooting
Spray Pattern Troubleshooting
Problem
Fluttering or spitting spray
Irregular pattern
Pattern pushed to one side, same side of air cap gets dirty
Cause
Insufficient fluid supply
Air in paint supply line
Attempting to ªfeatherº (partially trig- ger) the gun.
Fluid
On defective side of pattern, air horn holes are partially or totally plugged
Air horn holes partially or totally plugged
Solution
Adjust fluid regulator or fill fluid supply tank.
Check, tighten siphon hose connec- tions, bleed air from paint line.
Cannot ªfeatherº with an AA gun. Feathering will cause drastic reduc- tion of pressure at the tip, resulting in poor atomization and/or spitting.
Clean spray tip. See page 11.
Clean air horn holes with solvent and soft brush. See page 11.
Clean air horn holes with solvent and soft brush. See page 11.
