Hitachi 32UDX10S, 36UDX10S manual Picture-In-Picture Pip, FREEZE button With PIP ON, Single Freeze

PICTURE-IN-PICTURE (PIP)

FREEZE button (With PIP ON)

If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again.

NOTE: The FREEZE function will only operate when SINGLE PIP mode is chosen.

FREEZE button (With PIP OFF)

Press the FREEZE button to freeze the picture, depending on the mode selected (SINGLE or STROBE). To change FREEZE modes, use the PIP MODE button to cycle through the two different modes.

SINGLE FREEZE

Press the FREEZE button to freeze one frame of the picture you are currently viewing. Press this button again or PIP to return to normal viewing.

Hot Springs Clay Mask

C/O John Doe

Run-Spa Retreat

P.O. Box 55512

Any Town, USA 98765

Check or

Money Order Only

1-800-555-1212

FREEZE

ANT A 10

Hot Springs Clay

Mask

C/O CHAU/CHAN

Run-Spa Retreat

P.O. Box 55512

Any Town, USA 98765

Check or

Money Order Only

FREEZE

STROBE FREEZE

Press the FREEZE button to freeze three frames of the picture you are currently viewing. Press this button again or PIP to return to normal viewing. This feature is useful for viewing a moving picture that has many details, for example, a close play in a sporting event or a golf swing.

FREEZE

FREEZE

CAUTION: A pattern burn may develop if the sub-picture is left in the same corner permanently. If the PIP feature is used frequently, occasionally MOVE the sub-picture using the THUMB STICK , , , or .

NOTES: 1. Each freeze frame is delayed about 0.1 (1/10) second.

2. When viewing a COMPONENT: Y-PBPRINPUT, FREEZE is not allowed.

27