CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER
1.Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below.
2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after approximately eight seconds.
5.Press the INPUT button to return to the previous channel.
Rear Panel of Television
ANT A
TO
CONVERTER
ANT B
R L
AUDIO
TO
| |||
VIDEO | VIDEO | Y | VIDEO |
(MONO) | (MONO) | PB/CB | L |
L | L |
| |
|
| PR/CR |
|
R | R |
| R |
AUDIO | AUDIO |
| AUDIO |
INPUT 1 | INPUT 2 |
| MONITOR |
|
|
| OUT |
Back of
VCR
V L R
OUTPUT
VCR
Hitachi Model or
Similar Model
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.
2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 1 in example on page 13) Refer to your VCR operating guide for more information on line input- output connections.
17
