Hitachi 32UDX10S, 36UDX10S manual Rear Panel Jacks, Monitor OUT

REAR PANEL JACKS

ANT A

TO CONVERTER

ANT B

S-VIDEO	S-VIDEO
VIDEO	VIDEO

S-VIDEO

Y VIDEO

(MONO)	(MONO)
L	L

PB

PR

L

R L

AUDIO TO HI-FI

R	R
AUDIO	AUDIO
INPUT 1	INPUT 2

R AUDIO

MONITOR

OUT

Antenna Input/Output

The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.) The antenna output labeled TO CONVERTER allows the ANT A connection to pass directly to a different source such as a cable box, only when ANT B is displayed as a main picture.

Audio/Video Inputs 1 and 2

The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert the audio cable into the left audio jack.)

NOTE: You may use VIDEO, S-VIDEO, or COMPONENT: Y-PBPRinputs to connect to INPUT 1 and 2, but only one of these inputs may be used at a time.

MONITOR OUT

These jacks provide fixed audio and video signals which are used for recording. Use the S-VIDEO Output for high quality video output.

NOTE: S-VIDEO Output may be used for recording, only when the input is of S-VIDEO type.

AUDIO TO HI-FI Output

These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the television s main volume.

S-VIDEO Inputs 1 and 2

Inputs 1 and 2 provide S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.

11