Pioneer S-DV740, XV-DV440, S-DV440, XV-DV740 Other connections, Connecting using the S-video output

11Other connections

•When Recording mode is off, the audio from the analog output may be interrupted, depending on the operation.

•The Recording mode automatically switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.

Connecting using the S-video output

If your TV has an S-video input, you can use this instead of the standard video output for a better quality picture.

•Use an S-video cable (not supplied) to connect the S-VIDEO OUT to an S-video input on your TV.

Line up the small triangle above the jack with the same mark on the plug before plugging in.

				S-VIDEO
				INPUT
TV
				XV–DV440/740
OPTICAL IN		IN
	AUDIO
		CONTROL
	LINE 2	FM		AM
		ANTENNA UNBAL 75Ω		LOOP ANTENNA
S-VIDEO	VIDEO	Y	PB	PR
OUT	OUT

VIDEO COMPONENT VIDEO OUT

Note

•The S-video output is switchable between S1 and S2 formats for compatibility with all TVs. See Video Output settings on page 48 to change this setting.

Connecting using the component video output

If your TV has component video inputs, you can use these instead of the standard video output to connect this system to your TV. This should give you the best quality picture from the three types of video output available.

•Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT to a set of component inputs on your TV.

	COMPONENT
	INPUT
TV
	XV–DV440/740
IN
CONTROL
FM	AM
ANTENNA UNBAL 75Ω	LOOP ANTENNA

Y PB PR

COMPONENT VIDEO OUT

Note

•The component video output is switchable between interlaced and progressive formats. See Video Output settings on page 48 for more on this.

About progressive scan video

Compared to interlace video, progressive scan video effectively doubles the scanning rate of the picture, resulting in a very stable, flicker- free image. Progressive scan video is available only from the component video output.

54

En