Pioneer XV-DV740, XV-DV440, S-DV440 Using this unit with a Pioneer plasma display, Plasma display

Other connections

Important

•If you connect a TV that is not compatible with a progressive scan signal and switch the system to progressive, you will not be able to see any picture at all. In this case,

press STANDBY/ON to put the system in standby, then press and hold the front panel (stop) button for about 8 seconds until the display shows Mem.Clr.?. Press the front panel VOLUME – (DOWN) or + (UP) button so that the display shows Interlace?. Press the front panel button to set to interlace and switch the system back on.

Compatibility of this player with progressive-scan and high-definition TVs.

This player is compatible with progressive video Macro Vision System Copy Guard.

Consumers should note that not all high- definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this model, please contact our customer service center.

This system is compatible with the following Pioneer displays and monitors:

Plasma display

PDP-505HD, PDP-5030HD, PDP-4330HD, PDP- 5040HD, PDP-4340HD, PRO-10000HD, PRO- 800HD, PRO-1000HDI, PRO-800HDI, PRO- 1110HD, PRO-910HD, PDP-4300, PDP-5031

Projection monitor receiver

SD-533HD5, SD-643HD5, PRO-710HD, PRO- 610HD, PRO-510HD, PRO-720HD, PRO- 620HD, PRO-520HD, PRO-730HD, PRO- 630HD, PRO-530HD, PRO-730HDI, PRO- 530HDI

Using this unit with a Pioneer plasma display

If you have a Pioneer plasma display (models PRO-1110HD, PRO-910HD, PDP-5040HD and PDP-4340HD), you can use an SR+ cable (see note below) to connect it to this unit and take advantage of various convenient features, such as automatic video input switching of the plasma display when the input is changed.

Media receiver

CONTROL

OUT

Pioneer plasma display

XV-DV440/740

IN
CONTROL
FM	AM
ANTENNA UNBAL 75Ω	LOOP ANTENNA

Y PB PR

COMPONENT VIDEO OUT

•Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this unit through a media receiver to the CONTROL OUT jack of your plasma display.

Before you can use the extra SR+ features, you need to make a few settings in the unit. See SR+ control options for Pioneer plasma displays on page 44 for detailed instructions.

11

English Deutsch Français Italiano Nederlands Español

55

En