![](/images/new-backgrounds/1307112/30711225x1.webp)
FRONT PANEL CONTROLS
FRONT VIEW
42” PLASMA TV
①REMOTE CONTROL sensor
Point your remote at this area when selecting channels, adjusting volume, etc.
②POWER light indicator
To turn the PDP TV ON, press the main power button located on the BACK left side of the TV. A red
Indicating Lamp
Off
Lights Red
Lights Orange
Lights Green
Power Status | Operating | |
Off | When the MAIN POWER is set OFF. | |
Off | When the MAIN POWER is set ON and the Front Key or | |
| Remote Control POWER is OFF. | |
Off (Power Saving) | 1. | When the MAIN POWER is set ON. |
| 2. | No signal input (no sync. signal). |
On | When the POWER is ON. |
③POWER button
This power button is for power on the plasma television or change to standby mode.
④CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down (▼) and up (▲) buttons when in MENU mode.
⑤VOLUME level
Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left (W) and right (X) buttons when in MENU mode.
⑥INPUT/EXIT button
Press this button to select the desired input: NTSC, DTV,
⑦MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
12