23
MENU OPERATION (continued)
Setup Menu (TV mode) (continued)Selected Items Setup hint
Manual Tuning
Color
System
Auto
Select color system from 5 different modes.
PAL
SECAM
NTSC4.43
NTSC3.58
Skip
Off It allows you to skip unregistered channels automatically
when you use channel up (+) down (-) buttons to select
channels.
Regarding the unavailable channels, this function will be
set to [On] automatically to skip.
On
NR Off The noise on the screen or interference could be reduced,
especially at the area of weak electric fi eld.
On
Antenna Att.
Off The noise on the screen or interference could be reduced
in case that the receiving airwaves are too strong.
The selection on this item is applied to all the channels.
On
Fine Tuning -56~+56 ► : Increase the frequency data for the main tuner.
◄ : Decrease the frequency data for the main tuner.
Sort
You can change the order of channels as follows.
1. Move the cursor to the Channel row you want to
change order and then, press OK button.
2. The color of the letters on the designated line will be
turned into green bracket and with [ ].
3. Move the designated row by using▲▼buttons.
4. Press OK button to fi x the position.
This function is not available (grayed out) when the Auto
Tuning Mode is set to [Direct].
Teletext Language
Select Teletext Language from 4 different categories (West
Europe, East Europe, Cyrillic, and Arabic) according to
the area.
Example:
West Europe : Asian countries where the Teletext
is broadcasting in English such as
Singapore, Australia, and Malaysia.
East Europe : Poland, Sweden, Hungary
Cyrillic : Russia
Arabic : Arab countries
Auto Off
Off When no airwave has been received and no operation
has been made for 10minutes in TV mode, it turns to
standby mode automatically.
On
42PD8800TA 55PD8800T
A
HITACHI