PICTURE-IN-PICTURE (PIP)
SPLIT MODE PICTURE-IN-PICTURE
Split Mode PIP displays the main picture and
Main Picture
Ant A 10
Ant A 12
Sub Picture
THE REMOTE CONTROL
SURF button PICTURE-IN-PICTURE
This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP
Ant A 28
1 | 2 | 3 | 4 | SURF | |
SURF |
|
|
|
| |
5 | 6 | 7 | 8 | or | |
EXIT | |||||
|
|
|
| ||
9 | 10 | 11 | 12 |
|
NOTES: 1. If no buttons are pressed when in SURF mode,
2.If a channel is tuned during this SURF scanning,
3.SURF MODE PIP is allowed only when ANT A/ANT B is selected as the main channel.
4.If MOVIE/TV RATINGS lock functions setting is ON, SURF mode will be deactivated.
5.Closed Caption will not appear when SURF mode is on.
6.While in SURF scanning mode, press SELECT on the remote control to stop on a chosen channel. Press SELECT again to resume SURF scanning.
SWAP button (with PIP ON)
Press this button to toggle between the Main and Sub picture which is highlighted with a green border around the picture. Picture sound and channel can be controlled when it is highlighted.
Ant A 10 | Ant A 12 | Ant A 10 | Ant A 12 |
SWAP
SPLIT
NOTE: The SWAP button will only operate in PIP/POP/SPLIT PIP mode.
PIP MODE button
To change between the different PIP modes (POP, PIP, SPLIT) press the PIP MODE button when PIP is ON. Each press of this button will change PIP to a different mode.
Ant A 10
PIP MODE
Ant A 10
Ant A 12
PIP MODE
Ant A 12
PIP MODES will depend on the type of input signal.
| POP | PIP | SPLIT | SURF |
Antenna Analog Channels(ANT A/B) | YES | x | YES | YES |
480i | YES | x | YES | x |
480p | x | x | YES | x |
720p | x | x | YES | x |
1080i | x | YES | YES | x |
NOTE: The 480i, 480p, 720p and 1080i signals should be connected to the video inputs.
26
