FRONT PANEL CONTROLS
FIRST TIME USE
IR RECEIVER
The screen area also acts as the IR receiver (remote sensor) of the TV. When using the remote control, point it towards the screen for best response.
POWER button
Press this button to turn the TV on or off.
POWER light
This light is on during normal operation.
Light Blinking Slowly (2 seconds): television lamp is cooling down. It takes
NOTES: |
|
|
|
|
|
| ||||||
1. |
| INDICATOR |
| INDICATION |
| MEANING |
| ACTION | ||||
|
|
|
| |||||||||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
| LIGHT ON |
| NO LAMP LIGHT |
| Need to replace if |
|
|
|
|
|
|
|
|
|
| or BROKEN LAMP |
| LAMP still does not light by |
|
| LAMP LED |
|
|
|
|
| “Power On” again. | ||||
|
|
|
|
| WRONG LAMP UNIT |
| ||||||
|
|
| BLINKING |
|
| Check assembly condition of | ||||||
|
|
|
|
|
|
|
|
|
| ASSEMBLY / LAMP |
| LAMP UNIT |
|
|
|
|
|
|
|
|
|
| DOOR OPEN |
|
|
|
| TEMP |
| LIGHT ON |
| Too hot inside the |
| Call for Service | ||||
|
|
|
|
| ||||||||
|
|
|
|
| ||||||||
|
|
|
|
| OPTIC unit |
| ||||||
|
| LED |
|
|
|
|
|
| ||||
|
|
| BLINKING |
| COOLING FAN STOPPED |
|
| |||||
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| NORMAL |
|
|
|
| POWER |
| LIGHT ON |
| OPERATION |
|
| ||||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
| SLOWLY BLINKING |
| COOL DOWN |
|
|
2. If the LAMP, TEMP, and POWER LED are blinking in the order below, the television is warming up. | ||||||||||||
| POWER |
| TEMP |
|
|
| LAMP |
|
|
|
| |
|
|
|
|
|
|
|
| |||||
3.Your Hitachi LCD Rear Projection Television may appear to be OFF when it is set to input 1 ~ input 5 and the video signal is not received from the input jacks. Please make sure the Blue Power light indicator is not lit (OFF) when you are not watching for long lasting performance.
4.Your Hitachi LCD Rear Projection Television has an internal lamp that lights up the TV screen. Make sure to turn off the Power when you do not watch the LCD Rear Projection Television for longer lamp life.
down.
TEMP indicator
This light is off during normal operation.
If this indicator is lit, the optic unit is too hot. If this indicator is blinking, the cooling fan has stopped. Please call service.
LAMP indicator - NORMAL OPERATION INDICATOR IS OFF
If light is lit, the lamp has failed. See page
IMPORTANT NOTES:
1.A small number of missing, discolored, or lit all the time dots or pixels is characteristic of TFT LCD technology due to the manufacturing process irrespective of manufacturer.
2.Since LCD Rear PTV incorporates a high pressure lamp to display an image, it may take about one minute for the picture to become stable, after the power has been turned on. After extended use, the picture may darken, the color may look unusual, or the lamp “goes out,” (burns out). You may hear a “pop” sound when the lamp “goes out.” These are common characteristics of the lamp, and should not be considered defective.
3.LCD Rear PTV incorporates an advanced cooling fan system to prevent from overheating. If you hear the cooling fan, it should not be considered defective.
4.If you hear a “cracking” sound from the TV cabinet, it is due to the TV’s cabinet expanding and contracting due to room temperature changes. It has no effect on the TV’s functions.
8
