![](/images/new-backgrounds/1287430/287430107x1.webp)
On-Screen Display
Setup
CableCARD Information
After the CableCARD has been successfully installed, you can access CableCARD Information menu in the SETUP menu of the
Follow the instructions below to access the CableCARD Information menu.
1.Press the MENU button on the Remote Control to access the Main Menu screen.
2. | Use the CURSOR PAD | to highlight SETUP in |
| the Main Menu and press the SELECT button. | |
3. | Use the CURSOR PAD | to highlight CableCARD |
| Information and press the SELECT button. |
4.To view the CableCARD ID and Host ID, use the CURSOR PAD to highlight CableCARD Info and press the SELECT button.
NOTE: The Diagnostics Info. window is for
Service use only.
THINGS TO CHECK WHEN USING THE
CableCARD / CableCARD Services
1.Check that the CableCARD is properly inserted in the CableCARD slot.
2.Remove the CableCARD by pressing and pulling the CableCARD straight out.
3.Visually inspect the CableCARD to ensure all pin- holes are in good condition, with none blocked or damaged.
4.Make sure the CableCARD is
5.When the CableCARD is installed, note all screen messages that appear (“CableCARD Installed”, “Acquiring Data”, “CableCARD is not Installed”). If the “CableCARD Installed” message does not appear when card is installed, check the TV’s card slot and CableCARD pins for obstructions or damage.
6.If problems still remain, please contact your Cable Service Provider.
NOTES:
1.When a CableCARD is installed, Auto Channel scan will not be needed because the channel list is automatically loaded to the TV's channel memory.
2.The TV will take several seconds to detect and recognize the presence of the CableCARD. This process must be completed before any CableCARD information or Channel listings is accessed.
Video
Audio
Channel Manager
Locks
Timers
Setup
Move SEL Select
| Setup |
| |
| Set The Menu Options | ||
OR | Set The Power Saving | ||
| Set The Inputs | ||
| Set The Closed Captions | ||
| Set The Output Terminals | ||
| CableCARD Information | ||
| Set The Quick Start Options | ||
| Reset The Software | ||
| Move | SEL Select | |
| Setup |
| |
| CableCARD Information | ||
| Select the button below to acess | ||
| CableCARD ID and Host ID. | ||
|
| CableCARD Info. | |
OR | Select the button below to access | ||
CableCARD and Host Diagnostics. | |||
| |||
|
| Diagnostics Info. | |
| Move | SEL Return | |
|
| In order to start cable service | |
|
| for this device, please contact | |
|
| your cable provider |
CableCARD(tm):
Host:
Data:
Unit Address:
Press EXIT to return
54