FRONT PANEL CONTROLS | - 12 - |
leads to screws of the VHF or UHF adaptor. Plug the adaptor into the antenna terminal on the TV.
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your dealer or service store for the antenna mixer.
FRONT PANEL CONTROLS
Click to see front panel diagram.
QMENU BUTTON
Thjis button allows you to enter the MENU mode without using the remote. This makes it possible to set TV features to you preference, without using the remote.
RAVX (Audio/Video) selector/ ENTER button
Press this button to select the current antenna source, VIDEO: 1 or VIDEO: 2. Your selection is shown in the top right corner of the screen. This button also serves as the ENTER button when in MENU mode.
SVOLUME level
Press these buttons for your desired sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left and right buttons when in MENU mode.
TCHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down and up buttons when in MENU mode.
UPOWER button
Press this button to turn TV on or off.
VPOWER light
You will see a red light when the TV is turned on.