![](/images/backgrounds/170180/170180-6118x1.png)
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV | - 18 - |
You can also use the RECALL button to quickly clear many of the other
3 PIP CH button
Use the PIP CH button to select between main picture and
4 MENU, CURSOR buttons
All the
The "CURSOR" buttons will highlight functions or adjust and set different features.
5 CHANNEL SELECTOR buttons
"CHANNEL SELECTOR" buttons are used to set Family Favorites, Channel Memory, etc..
Enter two or three numbers to select channels. Enter "0" first for channels 1 to 9. For channels 100 and above, press the 1 button, wait until another dash appears next to the channel display on your TV, then enter the remaining two numbers using the number buttons.
Channel selection may also be performed by pressing CH up () or down (
). You may also use these buttons for QUICK LIST. Press and hold the CH up (
) or down (
) button and a window will appear allowing you to choose the channel you wish to tune. Release the CH up (
) or down (
) button when the channel you wish to tune is highlighted, and the TV will tune to that channel.
NOTE: The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (See page 29.)
6 INPUT button
The INPUT button will select between both antenna signals and the two sets of video input jacks each time the button is pressed. If the
NOTE: When ANT A is selected, the channel number in the upper right corner of the screen is in green. When ANT B is selected, the channel number is in yellow.