Lennox Hearth 50692101 owner manual Adjust temperature when program is on, January Program hold

Adjust temperature when program is ON

When the program is ON, the mode button (shown in figure 20, labeled spring...program is ON) indicates which program is running. In this mode, change temperature by pressing a set temp button, which produces an up or

down arrow, then use the arrows until the (or number is at the desired temperature (see A in figure 20).

While changing the setting, the other options menu appears (see B in figure 20), giving a list of options you can choose.

			outdoor	away
				mode
indoor temperature	set temp		temperature
	78	spring...	80
		program

You may select one of the hour buttons (1, 2, 8, or 24) if desired. If you select custom, a time/date appears and you have the option of setting the hold for any length of time (see C in figure 20).

After a hold is set, the other options menu disappears and a message will state when the hold expires, along with a cancel option should you choose to revert back to the program.

Note that if you do not choose one of the

will be that the program is held until the next period.

		(other options menu)
		away
indoor temperature	set temp	mode
		program hold until
	75	next program setting
		other options include

cool−to	is ON
75	fan is
	AUTO
heat to	fan is
	AUTOOFF
indoor humidity is 41%
touch	use arrows
cool−to	to change
button	temperature

cool−to

72

heat to

indoor humidity is 41%

use arrows to change temperature

1hr 2hr

8hr 24hr

custom

select an option or do nothing to accept the

default

until next period"

Wi−Fi 9:39 am January 23, 2012 ?

	system is cooling	Program hold until	cancel
		next period
Wi−Fi	9:39 am January 23, 2012		?

		January 2012					program hold
S	M	T	W	T	F	S
1	2	3	4	5	6	7	09 : 39 am
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31					save

Figure 20. Adjusting temperature with program running

Page 15

icomfort Wi−Fit 7−Day Programmable Communicating Thermostat