FRONT PANEL CONTROLS

- 10 -

FRONT PANEL CONTROLS

FRONT VIEW

Front Panel Diagram Illustration

1MENU button

This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote.

2INPUT/EXIT button

Press this button to select the current antenna source, VIDEO: 1, 2, 3 or alternate antenna source. Your selection is shown in the top right corner of the screen. This button also serves as the EXIT button

when

in MENU mode.

3CHANNEL selector

Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down () and up () buttons when in MENU mode.

4VOLUME level

Press these buttons for your desired sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left () and right () buttons when in MENU mode.

5POWER button

Press this button to turn the TV on or off.

NOTE: Your HITACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1, 2 or 3 is selected. Check the Power Light to make sure the TV is off when not in use.

To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold

the

POWER button on the TV set for approximately five seconds. Press the POWER button on the TV again to end the auto-demonstration.

6POWER light

You will see a red light when the TV is turned on.

7AI (Artificial Intelligence) sensor

The Artificial Intelligence sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. (See page 49.)

8REMOTE CONTROL sensor

Point your remote at this area when selecting channels, adjusting volume, etc.

9MAGIC FOCUS

Use this button to adjust your picture quality to optimum performance. (See page 40.)

10FRONT INPUT JACKS (for VIDEO: 3)

Use these audio/video jacks for a "quick" hook-up from a camcorder or VCR to instantly view your favorite show or new recording. Press the INPUT button until VIDEO: 3 appears in the top right corner of the TV screen. If you have mono sound, insert the audio cable in to the left channel jack.