CUSTOM | - 34 - |
NOTE: 1. If ANT A and ANT B are in the same SIGNAL SOURCE mode (see page 35), when a channel is locked, it is locked on both antenna inputs.
2.When using TV TIME OUT make sure the clock is set (see page 39).
3.When the recall button is pressed, a special icon appears on the and indicates that CHILD LOCK is activated.
4 EVENT PROG.
This function will automatically turn the TV on and off, one time only, every day or once a week.
4 Event Program Menu
Press CURSOR 
to select PROGRAM 1, 2, 3 or 4.
Press CURSOR 
or 
to select the time the TV will turn on and off. Use CURSOR 
to change position.
Press CURSOR 
or 
to highlight then CURSOR 
to select MODE: ONCE (TV will turn on/off one time
only) or MODE: DAILY (TV will turn on/off at the same time every day), or MODE: WEEKLY (TV will turn on/off at same time every week).
Press CURSOR 
or 
, CHANNEL (
) or (
), or number buttons to set the channel the TV will tune to when it automatically turns on.
If the clock is not set, you can not use this function and the screen below will appear.
NOTE:
1.The OFF Timer will only activate if the TV was turned on or tuned with the ON timer and no channel selection was made after this time. If you change the channel after the ON Timer has been activated, the OFF Timer will deactivate.
2.If no remote control button is pressed after ON Timer is activated, the TV will automatically turn off after three hours.
CAUTION: Do not use your TV as a deterrent when away from home by using the ON and OFF TIMERS. For safety, the TV should be turned off when you are away from home.
AUTO LINK
Use this function to automatically turn the TV on and tune to VIDEO: 1, 2, or 3, when it detects a VIDEO input. AUTO LINK Illustration.
Use CURSOR 
to select video input.
Use CURSOR 
or 
, then CURSOR 
, to change AUTO LINK setting.