REAR PANEL JACKS
12
Component: Y-PBPRInputs
Inputs 1 and 2 provide Y-PBPRjacks for connecting equipment with this capability, such as a DVD player or Set Top Box.
NOTES: 1. DO NOTconnect standard VIDEO or S-VIDEO to Input 1 or 2 when using Y-PBPRinput.
2. When using the Y-PBPRinput jacks, connect your components audio output to the TVs Input 1 or 2 Left and Right Audio input jacks.
If your component has a Coaxial Out or Optical Out, use these connectors in place of the standard Audio L/R output jacks.
3. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Youtput to the TVs PBinput and
the components R-Youtput to the TV s PRinput.
4. Your component outputs may be labeled Y-CBCR. In this case, connect the component CBoutput to the TVs PBinput and the
component CRoutput to the TVs PRinput.
5. It may be necessary to adjust TINTto obtain optimum picture quality when using the Y-PBPR inputs. (See pages 59 and 60)
6. To ensure no copyright infringement, the MONITOR OUToutput will be abnormal, when using the Y-PBPRjacks.
7. When using the Y-PBPR jacks, TV will automatically change to SPLITPIP mode. When you have Picture-in-Picture on and are
viewing a Y-PBPRinput, only SPLITmode is possible. (see page 29)
Coaxial Input
This jack provides high quality audio input from a Dolby Digital DVD player or HDTV Set Top Box. This input can be used for
VIDEO: 1 or VIDEO: 2 audio, as selected in the THEATER-INPUTSOURCE menu. (see page 67)
Optical Input
This jack provides high quality audio input from a Dolby Digital DVD player or HDTV Set Top Box. Use a digital optical cable to
connect your TV to a compatible device. This input can be used for VIDEO: 1 or VIDEO: 2 audio, as selected in the THEATER-
INPUT SOURCE menu. (see page 67)
NOTE: This TVs optical digital input jack fully complies with the international standard governing this type of jack (IEC958), and
is designed for connection to a Dolby Digital (AC-3 or PCM) DVD Player or Dolby Digital (AC-3 or PCM) HDTV Set Top
Box. Older equipment, some of which is not fully compliant with IEC958, may not be compatible with the Dolby Digital
bitstream. Such a connection using anything other than Dolby Digital AC-3 or PCM bitstream could create a high noise
level, causing damage to your speakers.