TIPS ON REAR PANEL CONNECTIONS
15
TIPS ON REARPANEL CONNECTIONS
S-VIDEOconnections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections
in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the television.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
Asingle VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 1 in the
example on page 13). Refer to your VCR operating guide for more information on line input-output connections.
You may use VIDEO, S-VIDEO, or COMPONENT: Y-PBPRinputs to connect to Input 1 or Input 2, but only one of these may be
used at a time.
Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
COMPONENT: Y-PBPR connections are provided for high performance components, such as DVD players. Use these connections
in place of the standard video connection if your device has this feature.
When using the Y-PBPRinput jacks, connect your components audio output to the TVs Input 1 or 2 Left and Right Audio input
jacks.
When using high performance equipment for VIDEO: 1 or VIDEO: 2 inputs, if it has an optical or coaxial output, you can use these
connections in place of the standard audio L/R connections.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Youtput to the TV s Pb input
and the components R-Y output to the TVs PRinput.
Your component outputs may be labeled Y-CBCR. In this case, connect the components CBoutput to the TVs PBinput and the
components CRoutput to the TVs PRinput.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPRinputs. (See pages 59 and 60)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPRjacks.