REAR PANEL CONNECTIONS

- 15 -

￿ Rear Speaker Terminals

These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the remote control main volume buttons. Use speakers with 8 Ohm impedance only.

￿ Speaker Matrix Surround Switch

Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video output capability.

REAR PANEL CONNECTIONS

Click to see Rear Panel Connections.

CONNECT ONLY 8 Ohm SPEAKERS

DO NOT SHORT CURCUIT THESE TERMINALS.

A SHORT CIRCUIT MAY DAMAGE YOUR TV

(such damage is NOT covered by your television warranty)

DO NOT USE METAL STAPLES, NAILS, OR OTHER CONDUCTIVE MATERIAL, TO SECURE YOUR SPEAKER WIRING.

Typical full-feature set-up. Follow connections that pertain to your personal entertainment system.

REAR SPEAKER TERMINAL CONNECTIONS

Connect after turning the power to the TV OFF.

Press the Right Speaker red button and insert the positive (+) lead wire into the hole below the button. When the button is released, the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.