THE REMOTE CONTROL (CLU-415UI)

- 17 -

* See page 10 for location of Surround Switch.

THE REMOTE CONTROL (CLU-415UI)

In addition to controlling all the functions on your HITACHI Projection TV, the new remote is designed to operate different types of VCR's and different types of CATV (Cable TV) converters with one touch. Basic operation keys are grouped together in one area.

To operate your TV, point the remote at the remote sensor of the TV, and press the TV button on the remote. The remote will now control your TV.

To operate your VCR, point the remote at the remote sensor of the VCR, and press the VCR button. The remote will now control your VCR.

To operate your Cable Box, point the remote at the remote sensor of the Cable Box, and press the CABLE button on the remote. The remote will now control your Cable Box.

Click to see the Remote

￿

These buttons allow the remote to control your TV, VCR, or Cable Box depending of which mode is chosen, as explained above.

￿,￿ LIGHT BUTTON

When you are in a dark room, press this button on the side of the remote to light up the buttons shown in ￿. The light will stay on for about 8 seconds if the light button is not pressed again. These buttons will not appear to light if the room is too bright.

￿ PRECODED VCR BUTTONS

These buttons always transmit the chosen precoded VCR codes.

￿ TV/VCR BUTTON

When the remote is in the TV or VCR mode, this is the TV/VCR button. When the remote is in the CABLE mode, this is the A/B button.

HOW TO USE THE REMOTE TO CONTROL YOUR TV

Click to see Remote

￿ POWER button