SET UP

- 29 -

Your choice will be shown on the display.

Reception channels for each mode are shown at the left.

Refer to your cable or TV guide for channel identification standards.

If certain CATV channels are poor or not possible in the CATV1 mode, set AIR/CABLE to CATV2.

AUTO PROGRAM

This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip over unused channels when using the CHANNEL UP () or DOWN () buttons.

If the MENU button is pressed while the auto programming function is engaged, programming will stop.

See CHANNEL MEMORY to add or erase additional channels.

CHANNEL MEMORY

Using this function after AUTOPROGRAM to add or erase additional channels to the remote control CHANNEL , buttons. Your choice will be highlighted magenta.