VIDEO
Reset Video
Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode.
Video |
| ANT A/B |
|
Picture Mode | Day | Night | |
Contrast | 100% |
| |
Brightness | 50% |
| |
Color |
| 50% |
|
Tint |
|
|
|
Sharpness | 50% |
| |
Color Temperature | High |
| |
Black Enhancement | Middle |
| |
Edge Enhancement | High |
| |
Reset Video Settings |
|
| |
Move | SEL Select |
|
|
Video |
|
Reset Video Settings | |
Select “Reset” to return the video | |
menu settings on this input to the | |
original | factory settings . |
| R e s e t |
Move | SEL Select |
Use CURSOR buttons to highlight functions.
Press the SELECT button to select Reset Video Settings.
Use the CURSOR button to access other video settings.
You can customize each of the Video Inputs to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. If RESET is selected, only the selected Input will reset to the initial conditions as explained above.
If RESET is selected in Video:1 Input, only Video:1 Input will return to factory conditions.
Video |
| ANT A/B |
|
Picture Mode | Day | Night | |
Contrast | 100% |
| |
Brightness | 50% |
| |
Color |
| 50% |
|
Tint |
|
|
|
Sharpness | 50% |
| |
Color Temperature | High |
| |
Black Enhancement | Middle |
| |
Edge Enhancement | High |
| |
Reset Video Settings |
|
| |
Move | SEL Select |
|
|
Video |
|
|
Color Management |
| |
Color Decoding |
| |
Auto Color | Off | |
Noise Reduction | Off | |
Auto Movie Mode | Off | |
Move | SEL Select |
|
Color Management Use this function to adjust and balance the listed individual colors to make them either deeper or more pure depending on the user’s preference.
Video |
|
|
Color Management |
| |
Color Decoding |
| |
Auto Color | Off | |
Noise Reduction | Off | |
Auto Movie Mode | Off | |
Move | SEL Select |
|
Video |
|
|
Color Management |
| |
Set User Colors |
| |
Magenta | 50% |
|
Red | 50% |
|
Yellow | 50% |
|
Green | 50% |
|
Cyan | 50% |
|
Blue | 50% |
|
Reset |
|
|
Move | SEL | Return |
Use the CURSOR buttons to highlight function.
Press the SELECT button to select User Colors setting. When the function has a “ ” in the box, it is ON. Press the CURSOR buttons to highlight and adjust individual colors.
Use the CURSOR buttons to highlight and select “Reset” to return all colors to default settings.
NOTE: When the Set User Colors box is not checked , the listed colors will be grayed out.
38
