Hitachi 57UWX20B Manual Convergence Adjustment Mode, To Move Adjustment Point

VIDEO

Manual Convergence Adjustment Mode

NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature.

2.Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode. DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode.

Using the Remote Control, select VIDEO-MAGIC FOCUS-MANUAL ADJUSTMENT MODE-START to access convergence crosshatch pattern. The adjustment point is indicated by the Adjustment Point Cursor.

To Move Adjustment Point

To move adjustment point, the Adjustment Cursor must be WHITE. Use the CURSOR , , , to move the Adjustment Cursor. Another way to move the Adjustment Point Cursor is to press the followiing buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED.

To Change the Color of Adjustment Point

Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.

To Adjust the Convergence

Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR , , , to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white.

MENU

Video

Audio

Ch. Manager

Locks

Setup

Move SEL Sel

Video

Magic Focus

Aligns the Red, Green, and Blue colors to correct for Magnetic Influences.

CURSOR

CURSOR

CURSOR

Video
Picture Mode	Sports
Contrast	100%
Brightness	50%
Color	50%
Tint
Sharpness	50%
Vertical Position
Magic Focus
Color System
Advanced Settings
Move SEL Select
	Adjustment Point
	Cursor

Adjustment Mode

Auto

Manual

If you want to adjust now Start

CURSOR

SELECT

Move SEL Return

If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.

EXIT

DONE : [1]

CANCEL : [2]

INI. RESET : [3]

BACK : [4]

Press the [1] button on the remote control to SAVE adjusted data and return to main picture. Press the [2] button on the remote control to CANCEL adjusted data and return to main picture. Press the [3] button on the remote control to recall the factory pre-set convergence data.

Press the [4] button on the remote control to return to the manual convergence adjustment mode (crosshatch pattern). Press the [9] button on the remote control to read the SAVED data.

37