SYSTEM SET-UP
performance leave the AUTOCOLOR function on.
•NOISE REDUCER
The NOISE REDUCER automatically reduces conspicuous noise in the picture without degrading picture quality.
• SUPER CONTRAST
Turn on the SUPER CONTRAST to improve picture detail in areas of high brightness.
•CONVERGENCE
Your Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called "convergence".
Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the TV. If you move your TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors.
To simplify convergence, the following feature allows you to display a test pattern of horizontal and vertical lines on the screen. Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes should be directly over each other to produce the white lines.
Note: If the 60SX3B/60SX4K or 50SX5P is unplugged from the wall outlet or there is a power loss, wait 30 seconds after the set is plugged in or power returns before turning the set on.
Press MENU, 2, ENTER, 3, ENTER to display the CONVERGENCE ADJUSTMENT.
Press the CURSOR 
, 
to move the color displayed up or down.
Press the CURSOR 
, 
to move the color displayed left or right.
Press ENTER to change the color.
Press MENU to exit.