PANEL JACKS AND CONNECTIONS

￿ AVX (Audio/Video) selector

Press this button to select the current antenna source, video:1, 2, or 3. Your selection is shown in the top right corner of the screen.

￿VOLUME level

Press these buttons for your desired sound level. The volume level will be displayed on the TV screen.

￿ CHANNEL selector

Press these buttons until the desired channel appears in the top right corner of the TV screen.

￿ POWER button

Press this button to turn the TV on or off.

￿ POWER light

You will see a red light when the TV is turned on.

NOTE: Your HITACHI TV will appear to be turned "off" if there is no video input when VIDEO:1 or 2 is selected using the AVX button. Check the Power On indicator to make sure the TV is off when not in use.

￿ AI (Artificial Intelligence) sensor

This "Artificial Intelligence" sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. See page 30.

￿ REMOTE CONTROL sensor

Point your Genius Remote at this area when selecting channels, adjusting volume, etc.

￿ V-SYNC (Vertical Hold) knob

If the TV picture "rolls" up or down, adjust the knob until you get a good picture. This control seldom needs adjustment.

￿ FRONT INPUT JACKS (for VIDEO:3)

Use these audio/video jacks for a "quick" hook-up from a camcorder or VCR to instantly view your favorite show or new recording. (Press the AVX button until VIDEO:3 appears in the top right corner of the TV screen.)

FRONT PANEL JACKS AND CONNECTIONS

•The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples.