Accessories

Use Only Genuine Graco Parts and Accessories

Four Finger Trigger 183±104

Longer than standard trigger. Reduces trigger pull when spraying mastics and heavy fluids. Replaces item 3, in the parts list, page 17.

Plastic Ball Tipped Fluid Needle 220±413

For fluid pressures below 500 psi (35 bar) and light viscosity fluid. Replaces item 5, in the parts list, page 17.

Ruby Ball Tipped Fluid Needle 222±497

For use with acid catalyzed finishes. Replaces item 5, in the parts list, page 17.

Fluid Needle Compression Spring 106±452

For spraying higher solids or heavier viscosity fluids. Replaces item 24, in the parts list, page 17.

Ultra High Molecular Weight Polyethylene Needle Packing Kit 221±150

Use to replace needle packings (item 47, in the parts list, page 17) when spraying urethane fluids. Helps eliminate isocyanate crystallization in packing area.

Grounding Clamp and Wire 222±011

12 ga, 25 ft (7.6 m) wire

Brush 101±892

For cleaning the gun.

High Pressure Ball Valves, Vitonr Seals 5000 psi (350 bar) Maximum Working Pressure Can be used as fluid drain valve.

210±657 1/2 npt(m) 210±658 3/8 npt(m) 210±659 3/8 x 1/4 npt(m)

In-line Fluid Filter 210±500

5000 psi (350 bar) Maximum Working Pressure

100 mesh. Fits onto the gun's fluid connector. 1/4±18 npsm.

210±501

168±517

 

 

Filter

205±264

164±075

Bleed-type Master Air Valve

300 psi (21 bar) Maximum Working Pressure Relieves air trapped in the air line between the pump air inlet and this valve when closed.

107±141 3/4 npt(m x f) inlet & outlet 107±142 1/2 npt(m x f) inlet & outlet

￿￿￿￿￿￿￿￿￿￿

Page 20
Image 20
Hitachi AA 2000 dimensions Accessories