Hitachi C57-WD8000, C47-WD8000 instruction manual Getting Started, Instructions for operating menu

GETTING STARTED

Instructions for operating menu

Before watching the TV, please familiarize yourself with this method to use the menu function of this TV. Instructions in this manual are based on using the remote control unit. The words or symbols with frames refer to the buttons on the remote control unit.

The Chinese characters on the TV screen are supplied by Rico Company. The logos and symbols used in this instruction manual are intended for explanation purposes, they might differ from those shown on the TV.

1.Menu: After the power is on, press the MENU button to enter the menu screen which shows a list of optional main adjustment items, such as Picture, Audio, Timer, etc.

2.Adjustment items: After a main adjustment item is “selected” and “entered”, the screen will enter into the selection and show a list of related optional sub-adjustment items. After a sub-adjustment item is “selected” and “entered”, it may enter the next stage of sub-menu display until the last stage of the adjustment item is entered. When an adjustment item is selected, the characters of the adjustment item will be highlighted and usually accompanied with a Ź mark.

Common symbols in menu display

1

2

3

4

5

6

Symbols

Select

Set

Set

L-U Set

Reset

Return

Description

This symbol is displayed at the bottom of the menu, indicating that you can select the adjustment item on the menu by pressing the Ÿ or ź cursor buttons on the remote control unit.

This symbol is displayed at the bottom of the menu, indicating that you can enter the adjustment item highlighted by pressing the ENTER button on the remote control unit.

This symbol is displayed at the bottom of the menu, indicating that you can adjust the selected item by pressing the Ż or Ź cursor buttons on the remote control unit.

This symbol is displayed at the bottom of the menu, indicating that you can enter the number you desired when pressing the number buttons ( 0 – 9 ) on the remote control unit.

The characters Reset is displayed in the menu, indicating that you can return the current menu setting to the factory default setting by pressing the ENTER button on the remote control unit.

This symbol is displayed on the menu, indicating that you can return to the previous page by pressing the RETURN button on the remote control unit.

3.You can stop and exit from the menu operation by pressing the MENU button anytime. If there is no operation in the menu after some times, it will automatically exit from the menu screen..

4.If the item in the menu is shown in grey, it means that it cannot be adjusted.

13