![](/images/new-backgrounds/1137495/137495129x1.webp)
CONNECTION WITH OTHER EQUIPMENT
About the jacks and connections of rear panel
1.Refer to the operation manual of your electronic equipment for additional information on connections.
2.If your device has only one audio output (mono sound), please connect it to the left channel jack (MONO/L).
3.Audio and video signal from the same source should be connected to the same group of terminals. Do not mix them.
4.Terminals Y/VIDEO,PB/CB,PR/CR in INPUT1 and INPUT2 are used to connect component outputs of HDTV STB, DVD, PDVD, etc. Y/VIDEO input terminal can also be used as the standard video terminal.
When you use Y/VIDEO, PB/CB, PR/CR terminals to connect component signals, press the RECALL button on the remote control unit to show the characters COMPONENT and AV1 or AV2 on the top right corner of the screen, which indicates that you are using component terminals to receive signals. However, when you use Y/VIDEO terminal instead of Y/VIDEO, PB/CB, PR/CR terminals to receive video signal, only the character AV1 or AV2 will appear on the top right corner of the screen.
The HDMI input on INPUT1 can be used to connect your external devices equipped with an HDMI output. When the HDMI on INPUT1 is connected, press the RECALL button on the remote control unit to show the characters HDMI or DVI and AV1 on the top right corner of the screen, which indicates that you are viewing the program through the HDMI on INPUT1.
Note: When the HDMI input on INPUT1 is used, please do not connect terminals (Y/VIDEO PB/CB PR/CR) on
INPUT1.
5.If your device has
If there are signals input from the same group of
6. | VIDEO | MONITOR OUT terminal outputs video signal receiving from RF, | |
| external equipment. When receiving component signals (Y PB/CB PR/CR) or HDMI signal, there is no output | ||
| from VIDEO | MONITOR OUT terminal. | |
7. | MONITOR OUT terminal outputs | ||
| equipment. When receiving signals from RF, VIDEO, Y, PB/CB, PR/CR terminals or HDMI, there is no output | ||
| from | MONITOR OUT terminal. |
8.FIXED/VARIABLE AUDIO MONITOR OUT terminals provide fixed or variable audio level output to external stereo system.
9.TV AS CENTER input jacks
These jacks are for stereo amplifiers with center signal output capability. This feature allows the TV speakers to be used as a center speaker.
10.IR BLASTER output jacks
Refer to page
65