English

Head

Head

Bevel Angle Scale

Bevel Angle Scale

4

3

1

2

Fence

Fence

 

 

Base

Miter Angle Scale

Turntable

Base

 

Turntable

Miter Angle Scale

Fig. 26

Fig. 27

Fence

Fence

Table on Base

Table on Base

Fig. 28

Fig. 29

Cutting method of crown molding without tilting the saw blade.

Crown Molding Vise Ass’y (Optional accessories)

6mm Wing Bolt

6mm Wing Bolt

Crown Molding

(1)

Crown molding Stopper (L) and (R) (optional accessories) allow

Stopper (R)

6mm Wing (Optional accessories)

easier cuts of crown molding without tilting the saw blade.

Bolt

 

Install them in the base both-sides side to be shown in Fig. 30-

 

 

 

 

a. After inserting Tighten the 6mm knob bolts to secure the

 

 

crown molding Stoppers.

 

 

[Optional accessories used]

 

 

• Crown molding Vise Ass’y (Include Crown molding Stopper

 

 

(L))

Crown Molding Stopper (L)

 

• Crown molding Stopper (L)

 

• Crown molding Stopper (R)

(Optional accessories)

 

Fig. 30-a

Crown Molding Vise Ass’y (Optional accessories)

6mm Knob Bolt

Knob

Fence

6mm Wing Bolt Crown Molding

(2)The crown molding vise (B) (Optional accessory) can be mounted on either the left fence (Fence (B)) or the right fence (Fence (A)). It can unite with the slope of the crown molding and vice can be pressed down.

Then turn the upper knob, as necessary, to securely attach the crown molding in position. To raise or lower the vise assembly, first loosen the 6mm knob bolt.

After adjusting the height, firmly tighten the 6mm wing bolt; then turn the upper knob, as necessary, to securely attach the crown molding in position. (See Fig. 30-b)

Crown Molding Stopper (L) Crown Molding Stopper (R) (Optional accessories)

Fig. 30-b

WARNING: Always firmly clamp or vise to secure the crown molding to the fence; otherwise the crown molding might be thrust from the table and cause bodily harm.

Do not bevel cutting. The main body or saw blade may contact the sub fence, resulting in an injury.

CAUTION: Always confirm that the motor head (see Fig. 1) does not contact the crown molding vise ass’y when it is lowered for cutting. If there is any danger that it may do so, loosen the 6mm knob bolt and move the crown molding vise ass’y to a position where it will not contact the saw blade.

Position crown molding with its WALL CONTACT EDGE against the guide fence and its CEILING CONTACT EDGE against the crown molding Stoppers as shown in Fig. 30-b.

Adjust the crown molding Stoppers according to the size of the crown molding. Tighten the 6mm wing bolt to secure the crown molding Stoppers.

19

Page 18 Page 20
Page 19
Image 19
Hitachi C 10FCE instruction manual Crown molding Stopper L and R optional accessories allow
Page 18 Page 20

C 10FCE specifications

The Hitachi C 10FCE is a powerful and versatile 10-inch sliding compound miter saw designed to meet the needs of both professional contractors and serious DIY enthusiasts. Renowned for its precision and ease of use, this tool is engineered to deliver accurate cuts while offering a range of features that enhance its functionality.

One of the standout features of the C 10FCE is its 15-amp motor, which delivers a robust performance capable of cutting through a variety of materials, including hardwoods, softwoods, and engineered woods. The motor provides a no-load speed of 5,000 RPM, allowing for swift and efficient cutting tasks. The saw is equipped with a unique 0 to 52-degree miter angle range, providing versatility for making precise crosscuts at various angles. The dual-bevel functionality allows users to make beveled cuts in both directions, amplifying the tool’s adaptability for a wide range of projects.

The C 10FCE is also equipped with a laser guide system, which aids in ensuring accuracy by projecting a line on the workpiece where the cut will occur. This feature is particularly useful for achieving clean and precise cuts, reducing the likelihood of errors. Additionally, the saw boasts a large, robust table that provides ample support for larger workpieces, enhancing stability during use.

Durability is an important characteristic of the Hitachi C 10FCE. The saw features a rigid base that minimizes vibration and maximizes stability, resulting in smoother operation. The model is constructed with high-quality materials, ensuring longevity and consistent performance over time.

Safety is another key aspect integrated into the C 10FCE design. The saw includes a blade guard that covers the upper portion of the blade while in operation, protecting users from accidental contact. The electric brake system stops the blade quickly after the trigger is released, further enhancing user safety.

In conclusion, the Hitachi C 10FCE sliding compound miter saw is a feature-rich tool combining power, precision, and safety. With its reliable motor, versatile cutting angles, laser guide system, and durable construction, it stands as an ideal choice for anyone looking to tackle complex cutting tasks with confidence and accuracy. Whether for intricate trim work or larger construction projects, the C 10FCE is built to handle a diverse range of applications efficiently.
Top Page Image Contents