English
USE OF DUST BAG
WARNING:
●To avoid serious accident, ensure the switch is in the OFF position, and disconnect the plug from the receptacle.
●Never attempt to saw any material like metal and so on that give off sparks. Such action can lead to fire or injury.
Adapting Mouth | Clasp |
|
1.Mounting the dust bag
Hold the clasp of the dust bag and insert it into the adapting mouth of the body while opening the thrusting mouth. (Fig. 19)
2.Dumping sawdust and cleaning the inside of dust bag
NOTE: If too much sawdust is accumulated inside the dust bag, the dust collector will run low on power. Attempt to dump the sawdust as early as you can and clean the dust bag thoroughly so that you can enjoy your work with strong dust collecting power.
(1)Hold the clasp, open the thrusting mouth of the dust bag, and pull it off from the body.
(2)Open the fastener (Fig. 20) and dump the sawdust.
Dust Bag
Fig. 19
Fastener
Fig. 20
USE OF DUST GUIDE
WARNING:
●To avoid serious accidents, ensure the switch is in the OFF position, and disconnect the plug from the receptacle.
●The dust guide is a component part that changes the discharge direction of sawdust and is not a tool to collect dust. Make certain that you wear protective glasses and a dustproof mask during the use of the dust guide.
CAUTION:
●The dust guide can change the direction of the discharge direction. Never point it in the direction of the worker.
●Never carry the tool by the dust guide.
18
