Hitachi CP-AW250N specification

Connection to the ports (continued)

To input component video signal to COMPUTER IN ports

ex.

USB

TYPE A

DC5V

0.5A

		D-sub plug
	USB TYPE B HDMI	COMPUTER IN2	IN1
	MIC	AUDIO IN1 AUDIO IN3 AUDIO OUT	S-VIDEO
CONTROL	MONITOR OUT

RCA plugs

RCA connectors

Y CB/PB CR/PR

COMPONENT VIDEO OUT

AUDIO IN2

VIDEO

VCR/DVD/Blu-ray

Disc player

To input component video signal to the COMPUTER IN1 or IN2 port of the projector, use a RCA to D-sub cable or adapter.

For about the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN1 and IN2 port (&3).

7

Image 7

Hitachi CP-AW250N user manual To input component video signal to Computer in ports

Contents

CP-AW250N Example of computer signal Initial set signals Computer IN1, B Computer IN2, C Monitor OUT Connection to the ports Video SDA SCLCEC USB Type a To input component video signal to Computer in ports RS-232C Communication Connection CRC Communicaion settings Response code / Error code h shows hexadecimal Command Control via the Network Port1 Port Communicaion Port TCP #9715 Command format Command control settings Automatic Connection Break Authentication Network Bridge Communication Operating Guide Communication settings RS-232C Communication / Network command table Gamma Gain B Color TempGain R Gain G Tint Offset BColor Temp Offset B Color Execute PhaseAuto Adjust Size Frame Lock Hdmi RangeComputer IN1 Computer IN2 Auto ECO Perfect Monitor OUT ECO ModeVolume Mirror Type a Volume HdmiVolume LAN Volume USB Language MIC VolumeHdmi Audio MIC Level Menu Position MenuPosition H Menu Position H Display Power onAuto Power Template MY BUTTON-2 MY BUTTON-1 High MY SourceRemote Freq Normal Avmt ? PJLink command Lamp ?