Hitachi CP-S210T, CP-S210F user manual Input Menu, Video, Frame Lock, 3D-YCS

Multifunctional Settings (continued)

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed.

Perform each operation in accordance with the instructions in the table below.

MENU
MAIN	COLOR SPACE	AUTO
PICTURE-1	COMPONENT	COMPONENT
PICTURE-2	VIDEO	AUTO
INPUT	FRAME LOCK	TURN ON
AUTO	3D-YCS	NORMAL
SCREEN	VIDEO NR	LOW
OPTION	PROGRESSIVE	TURN OFF
	INFORMATION
: SELECT

Item Description

Select a Color Space Mode:

AUTO ⇔ RGB ⇔ SMPTE240 ⇔ REC709 ⇔ REC601

•This item can be selected only at a RGB input or a COMPONENT VIDEO

COLOR SPACE input.

•When the AUTO is selected, the optimum mode is automatically selected. However, it may not work well at some signals. In such a case, select the SMPTE240 or REC709 for HDTV signal.

Select a Function of COMPONENT VIDEO Jacks:

COMPONENT ⇔ SCART RGB

COMPONENT • When the SCART RGB is selected, the COMPONENT VIDEO jacks function as ports for a RGB input with a SCART cable. Refer to the section “Signal Connectors” of “TECHNICAL”.

Select a Signal Type Mode:							⇒
AUTO	⇔	NTSC	⇔	PAL	⇔	SECAM
⇒	NTSC 4.43	⇔	M-PAL	⇔		N-PAL

•This item performs only at a VIDEO input or a S-VIDEO input. For a COMPONENT VIDEO input, although this item is ineffective, the signal type is

VIDEO identified automatically even if the AUTO is not selected.

•Selecting the AUTO automatically selects the optimum mode. However, it may not work well at a PAL60 signal and some other signals. If the picture becomes unstable (ex. a irregular picture, color lack), please select the mode depending on the input signal.

•The AUTO operation requires approximately 10 seconds.

Select the Frame Lock Mode:

TURN ON ⇔ TURN OFF

• This function performs only at a RGB input with vertical frequency of 48 to 72

FRAME LOCK

Hz.

• When the TURN ON is selected, a moving picture is displayed more smoothly.

• This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF.

Select a 3D-YCS mode:

	STILL IMAGE	⇔	NORMAL	⇔	TURN OFF
	• This function performs only at a VIDEO input of NTSC 3.58.
3D-YCS	• NORMAL is the mode for images with a lot of motions like movies, and STILL
	IMAGE is the mode for images with few motions or completely still ones like
	slides.
	• When this function performs, the VIDEO NR function is ineffective.

27