Multifunctional Settings (continued)
OPTION Menu
With the OPTION menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.
MENU
MAIN | VOLUME | 16 |
SCREEN TYPE | 4:3 | |
LAMP TIME | 1234h | |
INPUT | FILTER TIME | 21h |
AUTO | RESET |
|
SCREEN |
|
|
OPTION |
|
|
: SELECT
Item |
|
|
|
| Description |
|
| |
|
|
|
|
|
|
| ||
VOLUME | Adjust Volume: High | ⇔ |
| Low |
|
| ||
|
|
|
|
|
|
| ||
| Select the Screen Type: |
|
|
|
|
| ||
| 4:3 | ⇔ | 16:9 |
| ⇔ | 16:9 | ⇔ | |
SCREEN TYPE | • Please select the screen type used and the picture position in case of 16:9. | |||||||
| This selection is used as basic information for a suitable display. This function | |||||||
| should be performed before other picture adjustment. |
|
| |||||
|
|
| ||||||
| To begin the operation of this item, please press the | button of the | ||||||
| projector or the RESET button of the remote control for 3 seconds. | |||||||
| Reset the Lamp Timer: |
|
|
|
|
| ||
| Selecting the RESET performs this function. |
|
| |||||
| RESET | ⇒ | CANCEL |
|
|
|
|
|
•The numerical value of four digits shown on this menu is the projector use time since the last RESET operation of this item. The value is reset to 0 at the
LAMP TIME | same time the RESET is selected. |
•The value of this function is used to display the message of “CHANGE THE LAMP”. So this function must be performed only immediately after replacing the lamp.
Do not perform this function unless you have replaced the lamp. Perform this function every time the lamp is replaced. Incorrect performing of this function causes incorrect operation of the message function.
•Please see to the section “Lamp” about replacing the lamp.
To begin the operation of this item, please press the 
button of the projector or the RESET button of the remote control for 3 seconds.
Reset the Filter Timer:
Selecting the RESET performs this function.
RESET | ⇒ CANCEL |
•The numerical value of four digits shown on this menu is the projector use time since the last RESET operation of this item. The value is reset to 0 at the same time the RESET is selected.
FILTER TIME • The value of this function is used to display the message of “CLEAN THE AIR FILTER”. So this function must be performed only immediately after cleaning or replacing the air filter.
Do not perform this function unless you have cleaned or replaced the air filter. Perform this function every time the air filter is cleaned or replaced. Incorrect performing of this function causes incorrect operation of the message function.
•Please see to the section “Air Filter” about cleaning and replacing the air filter.
| Reset the OPTION Menu Items: | |
| Selecting the EXECUTE performs this function. | |
RESET | EXECUTE | ⇒ CANCEL |
| • The SCREEN TYPE item is returned to the initial setting. Note that the items | |
| VOLUME, LAMP TIME and FILTER TIME are not reset. | |
31
