Troubleshooting (continued)
Regarding The Indicator Lamps (continued)
POWER | LAMP | TEMP | Description | |
indicator | indicator | indicator | ||
| ||||
|
|
|
| |
|
|
| The cooling fan is not operating. Turn the power OFF and wait | |
Lighting or |
| Blinking in | at least 20 minutes. After the unit has sufficiently cooled down, | |
blinking in | Turned off | please make confirmation of the following item, and then | ||
red | ||||
red |
| resent the power to ON. | ||
|
| |||
|
|
| • Is there no foreign matter caught in the cooling fan? | |
|
|
|
| |
|
|
| There is a possibility that the interior portion has become | |
|
|
| heated. Turn the power OFF and wait at least 20 minutes. | |
Lighting or |
|
| After the unit has sufficiently cooled down, please make | |
Turned off | Lighting in | confirmation of the following item, and then resent the power | ||
blinking in | to ON. | |||
red |
| red | • Is there blockage of the air passage aperture? | |
|
| |||
|
|
| • Is the air filter is dirty? | |
|
|
| • Does the peripheral temperature exceed 35°C? | |
|
|
|
| |
| Alternative blinking in | There is a possibility that the interior portion has become | ||
Lighting in | overcooled. Please use the unit within the usage temperature | |||
green | the red | parameters (0°C to 35°C). After the treatment, resent the | ||
|
|
| power to ON. | |
|
|
|
| |
|
|
| It is time to clean the air filter, or there is no air filter. Please | |
| Simultaneous blinking | immediately turn the power OFF, and clean or change the air | ||
Lighting in | filter by referring to the “Air Filter” section of this manual. After | |||
green | in red | you have cleaned or changed the air filter, please be sure to | ||
|
|
| reset the filter timer. After the treatment, resent the power to | |
|
|
| ON. | |
|
|
|
| |
40
