MAINTENANCE (continued)
Air Filter Maintenance
Switch power OFF and remove the power cord from the power outlet, before beginning maintenance work.
The air filter should be cleaned as described below at intervals of approximately 100 hours.
1. Switch the projector power supply OFF, and remove the power cord from the power outlet.
2.Remove the air filter as shown in the diagram.
3.Vacuum the air filter.
4. Replace the air filter with the reverse procedure.
*Replace the air filter if contamination cannot be removed, or if it is damaged. Contact your dealer in such case.(Product name: Air filter : MU01291)
* Do not use the equipment with the air filter removed.
*When the air filter is clogged with dust etc. the CHECK AIR FLOW message appears on the screen and the power supply is switched OFF automatically to prevent the temperature rising inside the projector.
Other Maintenance
Switch power OFF and remove the power cord from the power outlet, before beginning maintenance work.
Inside maintenance
Ask a store for cleaning, the check toward an approximate goal of one time in 2 for the safe use. Stop care by yourself absolutely because it is dangerous.
The maintenance of the lens
Wipe it lightly by the lens cleaning paper on the market. Don't touch a lens.
Maintenance of the Cabinet and Remote controller
Wipe it lightly with the cloth whose thing in such cases as the gauze is soft. Soak soft cloth in the synthetic detergent thinned with the water or the water and wipe an iris well lightly when dirt is cruel. Furthermore, wipe it lightly with the soft cloth which dried, and finish it.
* The benzine and the paint thinner aren't to use a detergent except for the above and medicine.
* Don't use spray.
* Don't scratch it with the stiff thing and don't strike it.
