Hitachi CP-S833W, CP-S833E Lamp, Message table, On-screen display, Reset the lamp time, Action

Models: CP-S833W CP-S833E

1 32
Download 32 pages 53.76 Kb
Page 30
Image 30

Lamp (continued)

5

Install the lamp cover and fix it using screws.

∙ To prevent burn, install the lamp cover and secure it using the screws.

∙ Do not turn on the power with lamp cover removed.

Whenever the lamp is replaced, reset the total operation time of the lamp.

Do not reset if the lamp has not been replaced.

2. Reset the lamp time

Please carry out the following operation within 10 minutes from power on, if you replaced the lamp after

2,000 hours.

3

2

MAGNIFY VOLUME

OFF

POSITION ON

LASER

3

RESET

RIGHT

1

MENU ON

MOUSE ON

BLANK TIMER

RGBVIDEO

INPUT

RESET

1, 2

 

MENU

MUTEINPUT

ON

LAMP TEMP

STANDBY/ON

1)Press the RESET button on projector for 3 seconds or remote control TIMER button for 3 seconds and display the total lamp used time.

When accumulated operation time of the lamp reaches 1700 hours, the following display will appear at the bottom of the screen.

2)Press the RESET button on projector or remote control MENU ON button during displaying the lamp used time.

3)Select the “0” on the screen using the MENU ( ) button or DISK PAD.

LAMP 1700 h

LAMP 1700 □→ 0 CANCEL

Message table

On-screen display

The following messages are displayed on the screen.

 

MESSAGE

Action

 

 

 

 

CHANGE THE LAMP

Accumulated operation of lamp has exceeded 1,700 hours. It is recommended

 

"AFTER REPLACING LAMP,

to replace lamp. Replace with new lamp. If accumulated operation reaches

 

RESET THE LAMP TIMER."

2,000 hours, lamp will automatically turn off. *1

 

CHANGE THE LAMP

Lamp has 1,979 hours on it.

 

"AFTER REPLACING LAMP,

Call a maintenance person. *1

 

RESET THE LAMP TIMER."

Time is 20 ~ 0. (count down.)

 

THE POWER WILL TURN

 

 

OFF AFTER 20 Hr.

 

 

 

 

 

Bilnking of

When the lamp has 2,000 hours or more on it, the message will blink, and the

 

"CHANGE THE LAMP"

power will turns off after 10 minutes.

 

 

 

 

NO INPUT IS DETECTED

Signal is hot input. (See page 19, 20)

 

 

 

 

SYNC IS OUT OF RANGE

The horizontal frequency of the input signal exceeds the range of the projector,

 

it cannot be displayed. (See page 20, 21)

 

 

 

 

 

 

CHECK THE AIR FLOW

Clean the air filter of remove the blocking ventilation holes. (See page 28)

 

 

 

30

*1 This message are not displayed after 3 minutes.

But this message are displayed when you turn on the power again.

Page 30
Image 30
Hitachi CP-S833W, CP-S833E specifications Lamp, Message table, On-screen display, Reset the lamp time, Action

CP-S833W, CP-S833E specifications

The Hitachi CP-S833E and CP-S833W projectors stand out in the market for their balance of quality, performance, and versatility, making them ideal for both business presentations and educational environments. These projectors are designed to provide vibrant visuals, ensuring that audiences remain engaged and informed.

One of the main features of the CP-S833E and CP-S833W is their high brightness level, rated at around 3,000 ANSI lumens. This impressive brightness ensures that images are clear and visible even in well-lit rooms. Coupled with a high contrast ratio, these projectors deliver sharp images with deep blacks and vibrant colors, enhancing the overall viewing experience.

Both models utilize 3LCD technology, which helps in producing accurate color reproduction while minimizing the risks of color breakdown often associated with other projection technologies. The 3LCD system effectively uses three chips to project red, green, and blue light, resulting in richer and more natural images.

The Hitachi CP-S833E and CP-S833W are equipped with a native XGA resolution of 1024 x 768 pixels. This resolution strikes a good balance between image quality and performance, making it suitable for various content types, whether it be text-heavy slides, videos, or images. Furthermore, the projectors support various input options, including HDMI, VGA, and composite video, allowing for easy connectivity with a wide range of devices.

Additionally, these projectors come with features such as keystone correction and a built-in speaker, which enhance flexibility and functionality. Keystone correction allows users to adjust the projected image, ensuring it maintains a proper rectangular shape even when the projector is not perfectly aligned with the screen. The built-in speaker makes it convenient for users to present without needing additional audio equipment.

In terms of energy efficiency, both models are designed to consume less power. They feature a long lamp life, extending up to 5,000 hours in eco mode, which reduces replacement costs and contributes to lower overall operating expenses.

Overall, the Hitachi CP-S833E and CP-S833W projectors combine advanced technology with user-friendly features, making them a reliable choice for any presentation setting. Their impressive brightness, color accuracy, and versatile connectivity options ensure that they can meet the diverse needs of users, whether in classrooms or boardrooms.