Names and functions of each part
Main unit
RESET button
Resets unit to factory settings. (See page 15)
MUTE button
Silences the sound. (Cancels the mute when the unit is set in mute mode.)
LAMP indicator
This lights or blinks when the lamp does not light. (See page 31)
RESET
MENU
MUTEINPUT
ON
LAMP TEMP
MENU button
Picture adjustments.
Refer to page 15~18 for details.
INPUT button
To select the input source.
Each time this button is pressed, the input source is changed in sequence as shown below.
RGB1 
RGB2 
VIDEO1 
VIDEO2
TEMP indicator
This lights or blinks when temperature inside the projector is too high or when fan is abnormal.(See page 31)
STANDBY / ON button
Power ON/OFF button. | STANDBY/ON |
OFF sets the unit in standby mode. |
|
(see page 12∼13) |
|
Speaker
ZOOM knob
Adjusts picture size. (See page 12)
Remote control sensor
Lens
Lens cap 
∙Use the remote control transmitter within the range of about 16 feet from the remote control sensor and within 30°to both the left and right.
ON indicator
This blinks in the standby mode and lights in the operation mode.(See page 31)
Speaker
Cooling fan
(exhaust)
Handle
FOCUS ring
Adjusts focus. (See page 12)
7
