MAINTENANCE (continued)

Replacing the Lamp

1. Switch the projector OFF, remove the power cord from the power outlet, and wait at least 45 minutes for the unit to cool.

2. Prepare a new lamp.

3. Check that the projector has cooled sufficiently, and gently turn it upside down.

4. Loosen the two screws as shown in the diagram, and remove the lamp cover.

5.Loosen the two screws, and gently remove the lamp while holding the grips. Touching the inside of the lamp case may result in uneven coloring.

6.Install the new lamp and tighten the two screws firmly. Also

steadily push the opposite side of the screwed lamp into the unit.

7. Replace the lamp cover in position and tighten the screw firmly.

8. Gently turn the projector right-side up.

CAUTION • Ensure that screws are tightened properly. Screws not tightened fully may result

in injury or accidents.

Do not use the projector with the lamp cover removed.

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp. When the lamp has been replaced after the LAMP indicator is red, or the CHANGE THE LAMP message is displayed, complete the following operation within ten minutes of switching power ON. The power will be turned off automatically in over 10 minutes.

1.Switch power ON, and press the RESET button, for approximately three seconds. The ‘LAMP xxxx hr’ message will appear on the lamp timer on the bottom of the screen.

2.Press the MENU button on the remote control transmitter, or the RESET button on the control panel, while the lamp timer is displayed. The ‘LAMP xxxx 0 CANCEL’ message will then appear.

3.Press the and select 0, and wait until the timer display is cleared.

NOTE Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.

An air filter is attached to the optional lamp. Replace the filter after replacing the lamp.

ENGLISH-18

Page 19
Image 19
Hitachi CP-SX5600W user manual Maintenance, Replacing the Lamp, Resetting the Lamp Timer

CP-SX5600W specifications

The Hitachi CP-SX5600W is a high-performance projector designed to cater to the needs of educational institutions and businesses alike. This model is a part of Hitachi's extensive lineup, known for its reliability and advanced features that enhance presentations and viewing experiences. One of the standout features of the CP-SX5600W is its impressive brightness, delivering up to 5,500 ANSI lumens, which ensures clear and vibrant images even in well-lit environments. With a native resolution of WXGA (1280 x 800), this projector delivers sharp visuals that cater perfectly to today's widescreen content.

Another notable characteristic of the CP-SX5600W is its advanced color technology. Hitachi employs a powerful 3LCD technology, which offers vivid color reproduction and accurate color representation. This results in rich and lifelike colors, making it ideal for presentations that utilize graphics and videos. The contrast ratio of 2000:1 further enhances image quality by providing deeper blacks and brighter whites, ensuring that details are visible in both shadowy and brightly lit areas.

The projector also features flexible connectivity options, including HDMI, VGA, and composite inputs, allowing it to seamlessly connect with a variety of devices like laptops, document cameras, and media players. This flexibility makes it an excellent choice for multi-purpose environments. Additionally, the CP-SX5600W is equipped with a built-in 16-watt speaker, providing adequate audio output without the need for external speakers, enhancing the overall experience during presentations and lectures.

One of the essential technologies integrated into the CP-SX5600W is the Hitachi’s Intelligent Eco mode. This feature automatically adjusts the lamp brightness according to the content being displayed, extending the lifespan of the lamp and reducing energy consumption. This not only contributes to lower operational costs but also aligns with environmentally friendly practices.

Portability is another advantage with the CP-SX5600W, as it is designed to be compact and lightweight, making it easy to transport between different locations. Its intuitive user interface and remote control make setup and operation user-friendly, ensuring that even those with minimal technical expertise can effectively utilize the projector.

In conclusion, the Hitachi CP-SX5600W stands out in the projector market with its blend of brightness, advanced technology, and user-friendly features, making it a perfect choice for educational, corporate, and event uses. Its emphasis on quality, flexibility, and efficiency ensures that it meets the diverse needs of users while delivering remarkable performance.