Hitachi CP-X1200 user manual Auto Menu, Adjust, Power OFF, Power on

Multifunctional Settings (continued)

AUTO Menu

With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN	ADJUST
PICTURE-1	POWER OFF	0 min
PICTURE-2	POWER ON	TURN ON
INPUT	SEARCH	TURN ON
AUTO	RESET
SCREEN
OPTION
NETWORK
: SELECT

Item	Description
Pressing the	(or the ENTER) button performs the automatic adjustment.

■At a RGB signal

The vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically adjusted.

memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.

■At a video signal

ADJUST	The signal type mode best suited for the respective input signal will be
	selected automatically.
	memo This function is available only when the AUTO is selected to the item
	“VIDEO” of the INPUT menu. For a component video signal, the signal type is
	identified automatically independently of this function.
	memo This operation requires approximately 10 seconds, and the message
	“AUTO IN PROGRESS” is displayed during the operation.
	memo This operation may not work well at some signals. If the picture
	becomes unstable (ex. a irregular picture, a color lack), please select the
	suitable mode to the item “VIDEO” of the INPUT menu.
	Set the time using the	/	buttons. :
	Long (max. 99 minutes)		Short (min. 0 minute = DISABLE)
		AUTO		AUTO
		POWER OFF		POWER OFF
		ENABLE		DISABLE
POWER OFF	ex.	1min		0min
	When the time is set to 1 to 99, the projector lamp will go off and the
	STANDBY/ON indicator begins blinking when the passed time with a proper
	signal (without no-signal and an unsuitable signal) reaches at the set time.
	Please refer to the section “Turning Off The Power”.
	Select the TURN ON or the TURN OFF using the			/	buttons.:
POWER ON	TURN ON TURN OFF
	When the TURN ON is selected, you can turn the projector on without pressing
	the STANDBY/ON button. Please refer to the section “Turning Off The Power”.
			(This table is continued to the following page.)

29