Hitachi CP-X3011, CP-X2011, CP-X3511 Preparations, Loading batteries into the remote control

Preparations

Loading batteries into the remote control

Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.

Holding the hook part of the battery	1	2	3
1. cover, remove it.

2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P)

according to their plus and minus terminals as indicated in the remote control.

3. Replaceplace. the battery cover in the direction of the arrow and snap it back into

WARNING ŹAlways handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, ZKLFKFRXOGUHVXOWLQ¿UHLQMXU\DQGRUSROOXWLRQRIWKHVXUURXQGLQJHQYLURQPHQW ‡%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG'RQRWXVHEDWWHULHVRIGLIIHUHQW types at the same time. Do not mix a new battery with used one.

‡Make sure the plus and minus terminals are correctly aligned when loading a battery. ‡.HHSDEDWWHU\DZD\IURPFKLOGUHQDQGSHWV ‡'RQRWUHFKDUJHVKRUWFLUFXLWVROGHURUGLVDVVHPEOHDEDWWHU\ ‡'RQRWSODFHDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH ‡If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately. ‡2EH\WKHORFDOODZVRQGLVSRVLQJWKHEDWWHU\

ENGLISH

5