IMAGE Menu
IMAGE Menu
With the IMAGE menu, items shown in the table below can be performed.
6HOHFWDQLWHPXVLQJWKHFXUVRUEXWWRQVŸźRQWKH
SURMHFWRURUUHPRWHFRQWURODQGSUHVVWKHFXUVRUEXWWRQŹ on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.
/'07=4)$? | 5'.'%6 | |
| ||
2+%674' | #52'%6 | |
+/#)' | 18'45%#0 | |
+0276 | 8215+6+10 | |
5'672 | *215+6+10 | |
5%4''0 | *2*#5' | |
126+10 | *5+<' | |
'#5;/'07 #761#&,756':'%76' | ||
| ||
Item
Description
| 8VLQJWKHEXWWRQVŸźVZLWFKHVWKHPRGHIRUDVSHFWUDWLR | |
| For an RGB signal | |
| NORMAL Ù 4:3 Ù 16:9 Ù SMALL | |
ASPECT | For a video signal, | |
4:3 Ù 16:9 Ù 14:9 Ù SMALL | ||
| ||
| For a no signal | |
| ¿[HG | |
| • The NORMAL mode keeps the original aspect ratio of the signal. | |
| 8VLQJWKHEXWWRQVŸźDGMXVWVWKHRYHUVFDQUDWLR | |
OVER SCAN | Large (It reduces picture) Ù6PDOO ,WPDJQL¿HVSLFWXUH | |
• This item can be selected only for a video, | ||
| • When this adjustment is too large, certain degradation may appear | |
| at the frame area of the picture. In such a case, please adjust small. | |
| 8VLQJWKHEXWWRQVŸźDGMXVWVWKHYHUWLFDOSRVLWLRQ | |
| Up Ù Down | |
| • | |
V POSITION | on the screen. If this occurs please reset the vertical position to the | |
default setting. Pressing the RESET button when V POSITION is | ||
| selected will reset the V POSITION to the default setting. | |
| For a video signal, | |
| The adjustable range of V.POSITION depends on the OVERSCAN setting. | |
| It is not possible to adjust when the OVERSCAN is set to 10. | |
| 8VLQJWKHEXWWRQVŸźDGMXVWVWKHKRUL]RQWDOSRVLWLRQ | |
| Left Ù Right | |
| • | |
H POSITION | on the screen. If this occurs please reset the horizontal position to | |
the default setting. Pressing the RESET button when H POSITION | ||
| is selected will reset the H POSITION to the default setting. | |
| For a video signal, | |
| The adjustable range of H.POSITION depends on the OVERSCAN setting. | |
| It is not possible to adjust when the OVERSCAN is set to 10. | |
| 8VLQJWKHEXWWRQVŸźDGMXVWVWKHKRUL]RQWDOSKDVHWRHOLPLQDWHÀLFNHU | |
H PHASE | Right Ù Left | |
• This item can be selected only for an RGB signal or a component | ||
| ||
| video signal. |
30
