Hitachi CP-X265 user manual Network Menu, Dhcp, IP Address

NETWORK Menu

NETWORK Menu

Select [Network] from the main menu to access the following functions.

2+%674'	&*%2		67401((
/#)'	+2#&&4'5
+02 6	57$0'6/#5-
2	'(#7.6)#6 9#;
0'12%4''06+19 -	6+/'&+(('4	0%'
	G#6'5*16#0& 6+/'
'#5;/'07	+0(14/#6+10
	5'48+%'

NOTE • The factory default setting for DHCP is “TURN ON”. You do not have to set up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network

has DHCP enabled. ( User’s Manual - Network Functions)

•If you are not utilizing SNTP ( User’s Manual - Network Functions), then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list.

NOTE Ask with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause unnecessary troubles on the network.

Item	Operation
DHCP	DHCP TURN ON/TURN OFF:	DHCP
	Use the ▲/▼ buttons to turn DHCP on/off	TURN ON
(Dynamic Host		TURN OFF
	TURN ON  TURN OFF
Configuration
	Select TURN OFF when the network does not have DHCP
Protocol)
	enabled.
	Input the IP ADDRESS :
	Use the ▲/▼/◄/► buttons to enter the IP	192. 168. 1. 254
	ADDRESS. This function can only be used	IP ADDRESS
IP ADDRESS	when DHCP is set to “TURN OFF”.
	~Note~
	IP ADDRESS is a number which identifies this projector on the
	network. You cannot have two devices with the same IP ADDRESS
	on the same network.
	Input the SUBNET MASK :
	Use the buttons ▲/▼/◄/► to enter the	255. 255. 255. 0
SUBNET MASK same SUBNET MASK of your PC.		SUBNET MASK
	This function is available as long as DHCP
	is set to “TURN OFF”.

50