![](/images/new-backgrounds/1300497/300497171x1.webp)
Troubleshooting and Diagnostics
6.1Power-related Problems
Power indicator does not light when power is switched On:
SCheck that the power cord and plug are securely fitted to the printer and to a mains outlet.
SAsk for the power connector connections (and fuse) to be verified.
SAsk for the building electrical supply to be verified.
SPM correct inserted ?
6.2Error Messages
After switching the power ON the printer runs a self test. During the test the follo- wing messages may show up on the display:
|
|
|
|
Display | That means ... | Cause | |
|
|
| |
|
|
| |
No information, | No power | S Mains cable not connected. | |
POWER ON |
|
|
|
LED not not lit | or | S | PM not installed |
|
| S PM not property installed | |
|
|
|
|
LED lit but no | Hang up in reset after | S | print PSU defective |
reaction | power on | S | Print |
|
|
|
|
|
|
|
|
After all tests have been passed successfully the following message will be displayed:
READY 1 ELQ
or
BUSY 1 ELQ
Printer is OK
SPrinter ready for operation