Appendix D IBM ProPrinter Quick Refernce
Table 3: Vertical Form Handling
Escape Sequence | Mnemonic Function | |
|
| |
ESC 0 | Set Line Space to 1/8" | |
ESC 1 | Set Line Space to 7/72" | |
ESC 2 | Start Variable Line Space | |
ESC 4 | Set Top of Form | |
ESC 5 P1 | Carriage Return Function | |
| P1 | = 1 or 0/1: select CR + LF |
| P1 | = 0 or 0/0: cancel CR |
ESC A P1
ESC B P1 P2 . . . P64 NUL
ESC C P1
ESC C NUL P1
ESC N P1
ESC O
ESC [ \ EOT NUL NUL NUL P1 NUL
Set Line Space to P1/72" (P1/60")
P1 = P1/72" lpi (non AGM)
P1 = P1/60" lpi (AGM) (P1 = 0/1...5/5) Note: Default = 12/72" or 6 lpi
Set Vertical Tabs | (Pn = 0/1...F/F) | |
Set Form Length in Lines (P1 = 0/1...7/F) | ||
Set Form Length in Inch | (P1 = 0/1...1/6) | |
Set Automatic Perforation Skip | ||
P1: | is the number of lines from bottom | |
| of paper to skip. | (P1 = 0/0...F/F) |
Cancel Automatic Perforation Skip | ||
Set Line Space Unit |
| |
EOT | = 0/4 |
|
P1 | = B/4 : select 1/180" | |
P1 | = D/8 : select 1/216" | |
P1 | = 0/0 : setting remains unchanged | |
