Output Solutions C I - 8 0 6 0 manual Sample Print Menu, Recall Factory

Getting Started

Sample: PRINT MENU

PRINT OUT FW-VERSION 20xxxxxx HW-VERSION 29xxxxxx FPGA 4.7 PAGE COUNT 50

INTERFACE
I/F TYPE		PARALL./RS232
WORD LENGTH		8 BIT
BAUD-RATE		9600 BIT/S
PARITY BIT		EVEN
PROTOCOL		DTR
DSR/CTS MODE	IGNOR. DSR+CTS
I/F BUFFER		64 KBYTE
MENU ACCESS		FULL ACCESS
CURRENT SETTINGS			MACRO 1*	MACRO 2	MACRO 3	MACRO 4
PAPER SOURCE	TRACTOR LOWER TRACTOR LOWER TRACTOR LOWER TRACTOR LOWER TRACTOR LOWER
PAPER EXIT
PATH		BATCH	BATCH	BATCH	BATCH	BATCH
BATCH CAPACITY		-	-	-	-	-
PRINT POS. ADJ.
TRACT.L. V-POS		0.0	0.0	0.0	0.0	0.0
TRACT.L. H-POS		0.0	0.0	0.0	0.0	0.0
TRACT.U. V-POS		0.0	0.0	0.0	0.0	0.0
TRACT.U. H-POS		0.0	0.0	0.0	0.0	0.0
MANUAL V-POS		0.0	0.0	0.0	0.0	0.0
MANUAL H-POS		0.0	0.0	0.0	0.0	0.0
BIN 1 V-POS		0.0	0.0	0.0	0.0	0.0
BIN 1 H-POS		0.0	0.0	0.0	0.0	0.0
BIN 2 V-POS		0.0	0.0	0.0	0.0	0.0
BIN 2 H-POS		0.0	0.0	0.0	0.0	0.0
BIN 3 V-POS		0.0	0.0	0.0	0.0	0.0
BIN 3 H-POS		0.0	0.0	0.0	0.0	0.0
PAGE LENGTH		72 LINES	72 LINES	72 LINES	72 LINES	72 LINES
FONT QUALITY		LQ	LQ	LQ	LQ	LQ
GRAPHICS QUALITY		STANDARD	STANDARD	STANDARD	STANDARD	STANDARD
FONT		DATA	DATA	DATA	DATA	DATA
PITCH		10 CPI	10 CPI	10 CPI	10 CPI	10 CPI
LINE		6 LPI	6 LPI	6 LPI	6 LPI	6 LPI
EMULATION		EPSON LQ	EPSON LQ	IBM PROPR.	IBM PROPR. AGM	EPSON LQ
CARACTER SET	EPSON EXT. GCT		EPSON EXT. GCT	IBM SET 2	IBM SET 2 EPSON EXT. GCT
		1: U.S.A.	1: U.S.A.	1: U.S.A.	1: U.S.A.	1: U.S.A.
LEFT MARGIN		1. COLUMNS	1. COLUMNS	1. COLUMNS	1. COLUMNS	1. COLUMNS
RIGHT MARGIN		165. COLUMNS	165. COLUMNS	165. COLUMNS	165. COLUMNS	165. COLUMNS
LINE MODE		LF=LF, CR=CR	LF=LF, CR=CR	LF=LF, CR=CR	LF=LF, CR=CR	LF=LF, CR=CR
PERF. SKIP		YES	YES	YES	YES	YES
TEAR-OFF-MODE		NO	NO	NO	NO	NO

Note: An asterisk (’) after MACRO 1 indicates the actual macro

The values after FW- and HW-VERSION indicates the actual release.

All this standard settings of the firmware will be restored with the menu function

RECALL FACTORY.

1-15